5584-4-C

Netcom’s 5584-4-C is a Digitally tunable filter covering the frequency range of 108MHz to 174MHz. The filter has been designed using
new commercially available high voltage drivers and a new generation CPLD, which allows for improved performance and reduced cost while at the same time providing increased functionality. A control interference is provided to accept either parallel data and strobe or serial data, clock and strobe. The filter incorporates high voltage totem-pole drivers for the PIN diode bias voltage to minimize current draw from the 100 VDC supply.

  • Specifications
  • Performance
  • Mechanical
  • Ordering Information
  • Evaluation
Specifications
Frequency Range 108 to 174 MHz
Available BW 4%
*Ftune +/- 10% Rejection (Typical) N/A
*Ftune +/- 15% Rejection (Typical) N/A
*Ftune +/- 20% Rejection (Typical) N/A
Insertion Loss (Typical) 3.8 dB
Impedance (Input /Output) 50 Ω
Switching Speed, 90% RF Power < 15 µs
Tuning Channels 250
P1dB N/A
IP3  +42 dBm
Noise Figure N/A
DC Inputs
+5 Volts (±0.5 Volts) 250 mA
   +100 Volts (-7, +25 Volts) 1.0 mA
Operating Temperature Range -40 to +85°C
Control Interface – Selectable 8 bit Parallel or Serial

– TTL and CMOS Compatible

Dimensions [L x W x H] 2.30 x 1.40 x 0.55 inches

58.42 x 35.56 x 13.97 mm

Performance

Mechanical

Ordering Information

Evaluation