5584-3-Β
Netcom’s 5584-3-B is a Digitally tunable filter covering the frequency range of 90MHz to 200MHz. The filter has been designed using new commercially available high voltage drivers and a new generation CPLD, which allows for improved performance and reduced cost while at the same time providing increased functionality. A control interference is provided to accept either parallel data and strobe or serial data, clock and strobe. The filter incorporates high voltage totem-pole drivers for the PIN diode bias voltage to minimize current draw from the 100 VDC supply.
- Specifications
- Performance
- Mechanical
- Ordering Information
- Evaluation
Specifications
| Frequency Range | 90 to 200 MHz |
| Available BW (Typical) | 3.4% |
| *Ftune +/- 10% Rejection (Typical) | -30.0 dB |
| *Ftune +/- 15% Rejection (Typical) | -35.0 dB |
| *Ftune +/- 20% Rejection (Typical) | -40.0 dB |
| Insertion Loss (Typical) | -4.5 dB |
| Impedance (Input /Output) | 50 Ω |
| Tuning Speed | < 20 µs |
| Tuning Channels | 250 |
| P1dB | 30 dBm |
| IP3 | +42dBm |
| Noise Figure | < 0.5 dB above Insertion Loss |
| DC Inputs | |
| 5 Volts (±0.5 Volts) | 250 mA |
| 100 Volts (-7 Volts, +25 Volts) | 1.0 mA |
| Operating Temperature Range | -40 to +85°C |
| Control Interface | – SPI Serial Input
– TTL and CMOS Compatible |
| Dimensions | 2.30 x 1.40 x 0.55 inches
58.42 x 35.56 x 13.97 mm |
Performance
Mechanical
Ordering Information
Evaluation
