5583-3
Netcom’s 5583 is a digitally tunable filter covering the frequency range of 30 to 90MHz, with a 3% bandwidth. The filter has been designed using new commercially available high voltage drivers and a new generation CPLD, which allows for improved performance and reduced cost while at the same time providing increased functionality. A control interference is provided to accept either parallel data and strobe or serial data, clock and strobe. The filter incorporates high voltage totem-pole drivers for the PIN diode bias voltage to minimize current draw from the 100 VDC supply.
- Specifications
- Performance
- Mechanical
- Ordering Information
- Evaluation
Specifications
| Frequency Range | 30 to 90 MHz |
| Available BW | 3% |
| *Ftune +/- 10% Selectivity (Typical) | N/A |
| *Ftune +/- 15% Selectivity (Typical) | N/A |
| *Ftune +/- 20% Selectivity (Typical) | N/A |
| Insertion Loss (Typical) | 5.3 dB |
| Impedance (Input /Output) | 50 Ω |
| Switching Speed, 90% RF Power | 30 µs |
| Tuning Channels | 250 |
| P1dB | N/A |
| IIP3 | N/A |
| Noise Figure | N/A |
| DC Inputs | |
| +5 Volts (±0.5 Volts) | 250 mA |
| +100 Volts (-7, +25 Volts) | 0.2 mA |
| Operating Temperature Range | -40 to +85°C |
| Control Interface | – 8 bit Parallel or Serial
– TTL and CMOS Compatible |
| Dimensions [L x W x H] | 2.30 x 1.40 x 0.55 inches
58.42 x 35.56 x 13.97 mm |
Performance
Mechanical
Ordering Information
Evaluation
